| Type: | Micro-Computer Control Automatic Diesel Generator |
|---|---|
| Installation Method: | Fixed |
| Stroke: | Bangzhao or OEM |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Introduction
All-in-one ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, off-grid inverter, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; photovoltaic controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system.
Technical Features IP54 outdoor type LiFePO4 lithium battery inverter charger with BMS system for solar energy storage:
1. Standardized components, modular architecture, easy for expansion
2. High energy density, small footprint, short construction period, strong environmental adaptability
3. Battery module within the layered stack design, with more than 10 years of long design life
4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH-500KWH optional
5. The use of international advanced Mitsubishi IPM module and intelligent power module, with high power fast adjustment capability
6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management
7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system
8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform
9. PV charge controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of PV modules and batteries
10. Colorful LCD display all module working information and status
|
Model |
BZPC-30KW |
|
Isolation mode |
Low Frequency Transformer |
|
Battery Input |
|
|
Rated voltage (Vdc) |
480Vdc |
|
Rated current (A) |
63A |
|
Input voltage range (Vdc) |
432~700V |
|
Solar Controller Input |
|
|
Maximum. Input voltage of solar array(Vdc) |
<900Vdc |
|
Maximum power of solar array |
48KW |
|
Maximum charge current(A) |
100A |
|
AC Bypass Input |
|
|
Input rated voltage (Vac) |
380VAC three phase |
|
Bypass mode |
DC/Battery priority (AC bypass priority can set) |
|
AC Output |
|
|
Rated power (Kw) |
30KW |
|
Rated voltage |
380V±3% |
|
Number of phases |
3 phase 4 wire |
|
Rated current (A) |
45.5A |
|
Output frequency |
50Hz ±0.05 (Can be set 60Hz) |
|
Waveform |
Pure sine wave |
|
Waveform distortion rate (THD) |
Linear load≤2% |
|
Dynamic Response time (Load 0←→100%) |
5%, ≤50ms |
|
Power Factor (PF) |
0.99 |
|
Inverter Efficiency |
>93% |
|
Electrical insulation properties |
2000Vac,1 Minute |
|
Protection Function |
|
|
Overload Ability |
150%,10s |
|
Protection |
Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. |
|
Display |
LCD+LED |
|
Communication interface (optional) |
RS485 (A,B) |
|
Method of working |
Working continuously |
|
Cooling method |
Fan-cooled |
|
Short-circuit protection |
No automatic recovery, need to restart the machine |
|
Working Environment & Mechanical dimension |
|
|
Degree of protection |
IP20 (indoor) |
|
Working Altitude(m) |
≤3000m |
|
Working temperature (ºC) |
-20~+50ºC |
|
Relative humidity (ºC) |
0~90%, No condensation |
|
Noise (1 meter) |
≤55dB |
|
Unit size: (W x D x H) |
1000×900×1800mm |
|
Reference weight (Kg) |
790Kg |
|
Our company can adjust parameter configuration according to user's requirement. |
|
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}