Solre Power System Pure Sine Wave off-Grid Power Inverter 15kw

• Nature of Source Flow: Active Inverter
• Certification: ISO9001
• Output Power: >1000W
• Grid Type: off-Grid Inverter
• Output Type: Single
• Circuit Topologies: Full-Bridge Type
• Model NO.: BZP-15KW
• Nature of Wave String: Sine Wave Inverter
• Type: DC/AC Inverters
• Transport Package: Honeycomb Carton
• Specification: bzp-15kw
• Trademark: bangzhao
• Origin: Zhejiang
• HS Code: 8504403090
• Production Capacity: 1000

Product Description

Product Description
         Our BZP Series off-grid pure sine wave inverter is one ot the most advanced DC to AC Conversion products in the world.it is suitable use for areas without electricity,vehicles,ships,solar energy,wind turbime and other renewable energy system and etc;can supply power and provide guarantee effectively for the areas with traffic inconveniences,in the mountains pastoral,border,island and other areas without electricity,It has the main advantages of high quality sine wave AC output ,microcomputer control humanness design ,and it is high efficiency and low no-load  loss,and no pollution .The inverter can also supply AC power to all kinds of electric equipment,air conditioners,electric motors, refrigerators fluorescent lights ,televidions ,electric fans and other industrial power supply.
PV Off-grid Solar Power System
         PV Off-grid solar power generation system including solar panel array, solar charge controller, storage battery, Off-grid inverter, etc. In the sunshine, the solar panel convert the solar energy to DC power and charge the battery group by the charge controller. Then the off grid inverter convert the DC power into AC power for power supply the AC load.

Technical features
1.Usting the sixth generation efficient IPM.intelligent module from japanese mitsubishi.high efficiency and stable perrormance.It with powerful protection function ,the protection for short and circuit,over load ,over temperature is more safe and reliable.It's service life up to 15 years or more.
2.intelligentized modularized,simple structure design with powerful function.
3.Two kinds of start mode:Step-down voltage start and variable frequency start.Customers can set start mode according to the type of their load. this function is very convenient for users and also reduce frequency converter's usage ,which reduced the cost of equipment investment .easy to connect wires and control.
4.The output frequency can be setting Via LCD panel.it's very convenient for customer.
5.The output voltage can be set between -40% to +20% of rated voltage ,And the output voltage is very accuracy±1%.
6.The DC input voltage range can be set.over-voltage point ,under-voltage point  ,over-voltage recovery point ,under-voltage recovery piont all can be setting Via the LCD panel.
7.Pure sine wave output,with good dynamic response less than 50ms.waveform distortion rate smaller,higher conversion efficiency and stable output voltage.
8.Built-in low frequency isolation transformer,strong impact,resistance,available with motors,pump,air conditioners and other high impact equipment .At the same time DC busbar and AC busbar are completely isolated to avoid interference.
9.Wide input voltage can be set according to customer's requirement .Input voltage range can be selected from 150-400v,300-600v or 400-800v ,suitable for solar/wind system without,backup batteries,it can save many cost and maximization use the solar/wind energy.
10.Using SVPWM Space vector algorithms,high conversion efficiency,high instantaneous power and low losses conversion efficiency up to 94%.
11.Powerful data display function ,LCD can display the DC input voltage ,output  frequency,phase voltage ,phase current ,AC bypass input voltage ,output power KWH,time and date,temperature,fault code display.
12.European CE(EMC,LVD)Certificate,accredited by Australion CEC,ERAC energy network.
Technical Parameters (Normal model)

Model		BZP-12KW		BZP-15KW
Isolation mode		Low Frequency Transformer
DC Input	Rated voltage (Vdc)	192V	240V	192V		240V
	Rated current(A)	62.5A	50A	78A		62.5A
AC Output	Rated output power	12KW		15KW
	Output waveform	Pure Sine Wave
	Rated Voltage	220V±3%	380VAC±3%	220V±3%		380VAC±3%
	Phases	Single phase	3 phase 4 wire	Single phase		3 phase 4 wire
	Rated current(A)	55A	18A (phase current)	68A		23A (phase current)
	Frequency	50Hz or 60Hz
	Rated output voltage range (V)	110/120/220/230/240/380/400/415VAC optional
	Power Factor(PF)	1
	Overload Ability	150%, 5 seconds
	Efficiency	>93%
	Waveform distortion rate (THD)	<3%(Linear load)
	Dynamic Response (0 to 100% load)	5%,≤50ms
	Display	LCD
	Running mode	Working continuously
	Electrical insulation properties	2000Vac, 1 Minute
Communication interface (optional)		RS485
Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
	Cooling method	Fan-cooled
	Short-circuit protection	No automatic recovery, need to restart the machine
Working environment	Noise ( 1 meter)	≤50dB
	Degree of protection	IP20(indoor)
	Working Altitude(m)	≤2000
	Working temperature	-25~+50ºC
	relative humidity	0~90%,non-condensing
Mechanical dimension	Depth* Width * Height	540x540x760mm
	Weight (Kg)	150Kg			180Kg

Our company can adjust parameter configuration according to user's requirement.

bangzhao.en.made-in-china.com     phone:[phone]      Name:cici