| Customization: | Available |
|---|---|
| Nature of Source Flow: | Passive inverter |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of the load.
2, The output frequency can be set, this function is very convenient for customer.
3, The output voltage can be set between +20 % to -40 % of rated voltage. It's a great convenience to users.
4, The DC input voltage range can also be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries, photovoltaic modules also can be used flexibly.
5, Pure sine wave output. with good transient response less than 40MS, little harmonic distortion, higher conversion efficiency and stable output voltage.
6, Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
7, Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
8, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-400V or 480-850V.
9, Product have passed the European CE (EMC and LVD) certificated and accredited by Australia CEC energy network.
Without isolation transformer type for Car power system:
High power with isolation transformer type :
|
Model |
SDP-150KW |
|
|
Isolation mode |
Low Frequency Transformer |
|
|
DC Input |
Rated voltage (Vdc) |
532V(450-850vdc) |
|
Rated current(A) |
281A |
|
|
AC Output |
Rated output power |
150KW |
|
Output waveform |
Pure Sine Wave |
|
|
Rated Voltage |
127/220VAC±3% |
|
|
Phases |
3 phase 4 wires |
|
|
Rated current(A) |
394A (phase current) |
|
|
Frequency |
50Hz or 60Hz |
|
|
Rated output voltage range (V) |
380/400/415/440VAC optional |
|
|
Power Factor(PF) |
0.99 |
|
|
Overload Ability |
150%, 5 seconds |
|
|
Efficiency |
>93% |
|
|
Waveform distortion rate (THD) |
<3% linear load |
|
|
Dynamic Response (0 to 100% load) |
5%,≤50ms |
|
|
Display |
LCD |
|
|
Running mode |
Working continuously |
|
|
Electrical insulation properties |
2000Vac, 1 Minute |
|
|
Protection Function |
Protection |
Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. |
|
Cooling method |
Fan-cooled |
|
|
Short-circuit protection |
No automatic recovery, need to restart the machine |
|
|
Working environment |
Noise ( 1 meter) |
≤150dB |
|
Degree of protection |
IP20(indoor) |
|
|
Working Altitude(m) |
≤2000 |
|
|
Working temperature |
-25~+55ºC |
|
|
relative humidity |
0~90%,non-condensing |
|
Bangzhao Electric Co.,Ltd is a company who was established in 2008 and specialized in developing and supplying of power products. The high performance of its products stems from the cutting-edge technology developed by the domestic top 100 engineers. During the past 10 years, we have been providing the best system solutions of pure sine wave inverter,solar pump inverter,explosion-proof inverter,DC combiner box,controller,AC to DC battery cabinet ,power phase converter,lithium battery storage system etc. to customers, it is widely applied in the industry of solar energy,wind power,water power,car,ship,train,hospital, aviation,automation,etc.
){kind=link}