3-Phase Solar Inverter Built-in PWM or MPPT Charge Controller 50A to 120A Optional
PV Off-grid Solar Power System
PV Off-grid solar power generation system including solar panel array, solar charge controller, storage battery, Off-grid inverter, etc. In the sunshine, the solar panel convert the solar energy to DC power and charge the battery group by the charge controller. Then the off grid inverter convert the DC power into AC power for power supply the AC load.
Off-Grid Pure Sine Wave Inverter
Our BZP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors,
Performance Features For PWM controller
- The solar charge controller adopts industrial-grade chips to ensure the stable feature of controller
- Excellent EMC design
- High efficient PWM charging technology which has three charging stages (buck charging stage, equalize charging stage and float charging stage), and improves battery storage efficiency and charging efficiency.
- Advanced battery activation technology which increases battery lifetime 30% at least and improves the system performance
- The 30A to 300A solar charge controller adopts imported IGBT power module or MOSFET as electronic switch which can improve the stable performance of controller. There aren't any mechanical switches in the system
- LCD will display the system status and working parameters
- Parameters setting flexibly
- Users can parallel connect lots of the controller is a system
- Fully enclosed duct design and high speed fan for cooling making the controller working in a variety of harsh environments
- DC output function (Optional)
- Standard Modbus protocol for RS-485 communication to extend the communication distance (Optional)
- The solar charge controller will alarm when the system status is abnormal
- New SOC method displays battery power accurately
- With power generation statistics function to facilitate the view of power generation of daily, month and total
- There is temperature compensation function which will compensate the temperature according to different battery type
- The solar charge controller adopts graphical dot-matrix LCD and 4 buttons as HMI for full menu and easy operation
- RTC time function
Technical Features for solar inverter:
- Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
- Intelligentized, modularized, simple structure design with powerful function.
- Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
- The output frequency can be setting via LCD panel, it's very convenient for customer.
- The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
- The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
- Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
- Low Frequency Transformer, which ensures that inverter has high efficiency.
- High conversion efficiency, Max. Efficiency≥94%,if 48VDC input,the efficiency can more than 85%.
- Adopts black pure aluminum radiator, which confirms the best radiating performance.
- Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
- Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V.
- Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
- Optional function:RS485 remote monitoring,AC bypass input,built in solar charge controller or AC to DC battery charger.
3-Phase Solar Inverter Built-in PWM or MPPT Charge Controller 50A to 120A Optional:
| Model |
BZPC-40KW |
BZPC-30KW |
| Isolation mode |
Low Frequency Transformer |
| DC Input |
Rated voltage (Vdc) |
360V |
| Rated current(A) |
112A |
83A |
| Solar Charge Current |
Max current(A) |
30A/50A/60A/80A/100A/120A |
| AC Output |
Rated output power |
40KW |
30KW |
| Output waveform |
Pure Sine Wave |
| Rated Voltage |
380VAC±3% |
380VAC±3% |
| Phases |
3 phase 4 wire |
3 phase 4 wire |
| Rated current(A) |
60.6A (phase current) |
45A (phase current) |
| Frequency |
50Hz or 60Hz |
| Rated output voltage range (V) |
380/400/415/440VAC optional |
| Power Factor(PF) |
1 |
| Overload Ability |
150%, 5 seconds |
| Efficiency |
>93% |
| Waveform distortion rate (THD) |
<3%(Linear load) |
| Dynamic Response (0 to 100% load) |
5%,≤50ms |
| Display |
LCD |
| Running mode |
Working continuously |
| Electrical insulation properties |
2000Vac, 1 Minute |
| Communication interface (optional) |
RS485 |
| Protection Function |
Protection |
Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. |
| Cooling method |
Fan-cooled |
| Short-circuit protection |
No automatic recovery, need to restart the machine |
| Working environment |
Noise ( 1 meter) |
≤80dB |
| Degree of protection |
IP20(indoor) |
| Working Altitude(m) |
≤2000 |
| Working temperature |
-25~+50ºC |
| relative humidity |
0~90%,non-condensing |
Audited Supplier 
){kind=link}