High Voltage Large Charge Current Charging Cabinet for Electric Car

Type: Any Battery
Charger Type: Electric Charger
Charger Application: Standard Battery
Nominal Voltage: 150-1000VDC
Charger Style: Solar Charger
Compatible Battery Type: 12-Volt
Customization:
Diamond Member Since 2015

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
REG75030G
Size
2V,12V,24V
Certification
CE
Socket Type
Tb Terminal
Recyclable
Non-Recyclable
Transport Package
Honeycomb Box with Pallet or Wooden Box
Specification
150-100VDC output
Trademark
BANGZHAO OR OEM
Origin
China
HS Code
8504403090
Production Capacity
9999PCS

Product Description

High voltage large charge current charging cabinet for Electric car
Bangzhao electric big current charger cabinet for electric vehicle charging station. With three-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.

1.    Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2.    Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than ±0.5A.
3.    Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 320 Vac ~ 530 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4.   Control of output constant power

When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
5.    Temperature limited power
Under 55°C ambient temperature, the module can output full power of 20kW;
Over 55°C ambient temperature, the module shall be used by derating with the power Linearly .
Under 65°C ambient temperature, the allowable output power of the module is 10kW.
Under 75°C ambient temperature, the output power of the module is reduced to 0.
6.    Regulation of output current limiting point
The module has the function of stepless current limiting. The current limiting point within the scope of 0~33.3A(High voltage)/0A~50A(low voltage) is adjustable through the external monitoring module. When the output voltage is within 50Vdc ~ 750Vdc, the current limiting accuracy of the module is ±0.3A.
8.    Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9.    Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10.  Protection of input overvoltage/ voltage shortage
When the input voltage is less than 260 Vac or more than 530 Vac, the protection indicator light is on and the module stops working, without output.
when the module is in Single-phase communication mode, the input voltage is less than 160 Vac or more than 300 Vac, the protection indicator light is on and the module stops working, without output Meanwhile, this condition will be transmitted to the monitoring module. The function can be recovered automatically.
11.  Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12.  Over-temperature protection
The environmental over-temperature protection point is 80°C. When the DC panel has a temperature over 100°C, the module will stop working; when the DC panel has a temperature below 90°C, the module will automatically work again.
13.  Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14.  Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
15.  Interruption of background communication
CategoryNameParameter
Environmental conditionsOperation temperature-40°C ~ +75°C, derating is require when the temperature is above 55°C.
Storage temperature-40°C ~ +70°C
Relative humidity≤95%RH, without condensation
Cooling modeForced air cooling
Altitude2,000 m a.s.l., derating is require when the altitude is above 2,000 m a.s.l.
Atmospheric pressure79 kPa ~ 106 kPa
AC inputInput systemThree phases + PE
Voltage range260 Vac ~ 530 Vac
The maximum static voltage borne under no operation600 Vac
Rated voltage400 Vac
Maximum current32A
Grid frequency45 Hz~ 65 Hz
Rated frequency50Hz/60Hz
DC outputVoltage range50 Vdc ~ 750Vdc
Current range0 ~ 33.3A (high voltage)/ 0~50A(low voltage)
Rated current26A@750V (required for setting of current limiting point,750V is 26.67A)
Steady voltage precision<±0.5%
Steady current precision≤±1% (rated range of 20% ~ 100% for output load)
Load regulation rate≤±0.5%
Grid regulation rate≤±0.1% (testing range is 320V ~ 530V)
Startup overshoot≤±3%
Peak-to-peak value noise≤1% (150~750V, 0~20MHz)
Power factor and THDPower factor≥0.95   Full-load output power of @20%~50%
≥0.98   Full-load output power of @50%~100%
≥0.99  Full-load output power, input nominal voltage and frequency of @100%
THD≤5%  Full-load output power of  @50%~100%
EfficiencyUnder Rated input voltage95.2%,@750V,50%~100%
EMCEmissionClassA , Meet the requiremnt of  NB/T 33001-1-2010,NB/T 33008-1-2013  
ImmunityC lassA , Meet the requiremnt of  NB/T 33001-1-2010,NB/T 33008-1-2013  
OtherInstant impulse current upon startup<45A
Current sharingIn case of load of 10%~100%, the module current sharing error ≤ rated output current of ±5%.
Noise65dB(1m away,
Startup duration (select the startup mode through the monitoring module)Normal startup mode: the time delay from AC power-on to module output is ≤ 8s.
Output delayed startup: The startup duration can be set through the monitoring module, with default output startup duration of 3~8s.
Earthing resistanceEarthing resistance ≤ 0.1Ω, bearable current ≥ 25A
Surge protectionMeets IEEE C62 41-1991 Class B3 rating, 6kV/3kA (1.2/50μs impulse voltage and 8/20μs inrush current mixed wave)
Insulation  resistanceThe insulation resistance of DC part and AC part to housing and the AC part to the DC part shall be ≥ 10MΩ.
Insulation strengthAC input terminal to the housing 3535V DC voltage 20S clock, no breakdown, no arcing phenomenon, steady state leakage current is less than 1mA;
AC input terminal to DC output terminal 3535V DC voltage 20S clock, no breakdown, no arcing phenomenon, steady-state leakage current is less than
1mA;
DC output terminal to the housing 3535V DC voltage 20S clock, no breakdown, no arcing phenomenon, steady state leakage current is less than 1mA;
 ROHSR5
Mechanical parametersSize84Mm (H) ×226mm (W) ×395mm (D)
Weight≤11kg
 

Send your message to this supplier

*From:
*To:
avatar Mrs. Molly
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now