15kw MPPT Solar System Hybrid off Grid Inverter with AC Mains Bypass

• Customization: Available
• Nature of Source Flow: Active Inverter
• Certification: ISO9001, CE
• Model NO.: BZP-15KW
• Output Power: >1000W
• Grid Type: off-Grid Inverter
• Output Type: Triple
• Circuit Topologies: Full-Bridge Type
• Nature of Wave String: Sine Wave Inverter
• Type: DC/AC Inverters
• Efficiency: >94%
• Frequency: 50-60Hz
• Output Waveform: Pure Sine Wave
• Degree of Protection: IP20
• Display: LCD+LED
• Transport Package: Wooden Box or Honeycomb Box
• Specification: 540x540x760mm
• Trademark: Bangzhao and OEM
• Origin: Zhejiang
• HS Code: 8504403090
• Production Capacity: 99999

Product Description

PV Off-grid Solar Power System
PV Off-grid solar power generation system including solar panel array, solar charge controller, storage battery, Off-grid inverter, etc. In the sunshine, the solar panel convert the solar energy to DC power and charge the battery group by the charge controller. Then the off grid inverter convert the DC power into AC power for power supply the AC load.

Technical Features:

1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
2. Intelligentized, modularized, simple structure design with powerful function.
3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
4. The output frequency can be setting via LCD panel, it's very convenient for customer.
5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
8. Low Frequency Transformer, which ensures that inverter has high efficiency.
9. High conversion efficiency, Max. Efficiency≥94%,if 48VDC input,the efficiency can more than 85%.
10.  Adopts black pure aluminum radiator, which confirms the best radiating performance.
11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
12. Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V.
13. Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
14. Optional function:RS485 remote monitoring,AC bypass input,built in solar charge controller or AC to DC battery charger.

Stand type:


Technical Parameters (Normal model)

Model		BZP-12KW		BZP-15KW
Isolation mode		Low Frequency Transformer
DC Input	Rated voltage (Vdc)	192V	240V	192V		240V
	Rated current(A)	62.5A	50A	78A		62.5A
AC Output	Rated output power	12KW		15KW
	Output waveform	Pure Sine Wave
	Rated Voltage	220V±3%	380VAC±3%	220V±3%		380VAC±3%
	Phases	Single phase	3 phase 4 wire	Single phase		3 phase 4 wire
	Rated current(A)	55A	18A (phase current)	68A		23A (phase current)
	Frequency	50Hz or 60Hz
	Rated output voltage range (V)	110/120/220/230/240/380/400/415VAC optional
	Power Factor(PF)	1
	Overload Ability	150%, 5 seconds
	Efficiency	>93%
	Waveform distortion rate (THD)	<3%(Linear load)
	Dynamic Response (0 to 100% load)	5%,≤50ms
	Display	LCD
	Running mode	Working continuously
	Electrical insulation properties	2000Vac, 1 Minute
Communication interface (optional)		RS485
Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
	Cooling method	Fan-cooled
	Short-circuit protection	No automatic recovery, need to restart the machine
Working environment	Noise ( 1 meter)	≤50dB
	Degree of protection	IP20(indoor)
	Working Altitude(m)	≤2000
	Working temperature	-25~+50ºC
	relative humidity	0~90%,non-condensing
Mechanical dimension	Depth* Width * Height	540x540x760mm
	Weight (Kg)	150Kg			180Kg