| Customization: | Available |
|---|---|
| Output Type: | DC Output |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Category | Name | Parameter |
| Cooling mode | Forced air cooling | |
| Altitude | 2,000 m a.s.l., derating is require when the altitude is above 2,000 m a.s.l. | |
| Atmospheric pressure | 79 kPa ~ 106 kPa | |
| AC input | Input system | Three phases + PE |
| Voltage range | 260 Vac ~ 530 Vac | |
| The maximum static voltage borne under no operation | 600 Vac | |
| Rated voltage | 400 Vac | |
| Maximum current | 38A | |
| Grid frequency | 45 Hz~ 65 Hz | |
| Rated frequency | 50Hz/60Hz | |
| Standby power consumption | <9W | |
| Three-phase equilibrium | The difference between the maximum and minimum voltage of neutral conductor for three-phase input ≤ 10V | |
| DC output | Voltage range | 150 Vdc ~ 1000Vdc |
| Current range | 0 ~ 25A (current limiting point is settable) | |
| Rated current | 20A (required for setting of current limiting point) | |
| Steady voltage precision | <±0.5% | |
| Steady current precision | ≤±1% (rated range of 20% ~ 100% for output load) | |
| Load regulation rate | ≤±0.5% | |
| Grid regulation rate | ≤±0.1% (testing range is 320V ~ 530V) | |
| Startup overshoot | ≤±3% | |
| Peak-to-peak value noise | ≤1% (200~1000V, 0~20MHz) | |
| Power factor and THD | Power factor | ≥0.90 Full-load output power of @25%~50% |
| ≥0.98 Full-load output power of @50%~100% | ||
| ≥0.99 Full-load output power, input nominal voltage and frequency of @100% | ||
| THD | ≤5% Full-load output power of @50%~100% | |
| Efficiency | Under Rated input voltage | ≥95.0%@1000V-20A, |
| EMC | Emission | ClassA According to IEC 61000-6-3 |
| Immunity | According to IEC 61000-6-1 | |
| Certification | CE | IEC61851-1 |
| Other | Instant impulse current upon startup | <45A |
| Current sharing | In case of load of 10%~100%, the module current sharing error ≤ rated output current of ±5%. | |
| Noise | ≤65dB(1m away,ambient temperature is 25ºC, under rated input voltage and output is1000V-20A | |
| Startup duration (select the startup mode through the monitoring module) | Normal startup mode: the time delay from AC power-on to module output is ≤ 8s. | |
| Output delayed startup: The startup duration can be set through the monitoring module, with default output startup duration of 3~8s. | ||
| Earthing resistance | Earthing resistance ≤ 0.1Ω, bearable current ≥ 25A | |
| Lighting protection | 5kA | |
| Insulation resistance | The insulation resistance of DC part and AC part to housing and the AC part to the DC part shall be ≥ 10MΩ. | |
| Insulation strength | Within the 1 min of the AC input terminal to the CAN side 4242V DC voltage, there is no breakdown and flashover and the steady leakage current is less than 1mA; Within the 1 min of the AC input terminal to the enclosure 2121V DC voltage, there is no breakdown and flashover and the steady leakage current is less than 1mA; Within the 1 min of the AC input terminal to the DC output terminal 2121V DC voltage, there is no breakdown and flashover and the steady leakage current is less than 1mA; Within the 1 min of the DC output terminal to the enclosure 2121V DC voltage, there is no breakdown and flashover and the steady leakage current is less than 1mA; Within the 1 min of the DC output terminal to the CAN side 4242V DC voltage, there is no breakdown and flashover and the steady leakage current is less than 1mA; Within the 1 min of the CAN to the enclosure 707V DC voltage, there is no breakdown and flashover and the steady leakage current is less than 1mA. |
){kind=link}