PWM 3kw Wind-Solar Hybrid Charge Controller for Wind Turbine and Solar Panel System

• Customization: Available
• After-sales Service: Yes
• Warranty: 12 Months
• Model NO.: BWS-3KW-48V
• Condition: New
• Certification: CE
• Application: Collector Controller, Water Heater Controller, Solar System Controller, Charger Controller, Lighting Controller, Wind Controller, Solar Working Station, Voltage Controller, Thermal Controller
• Rated Voltage: 48V
• Type: Wind-Solar Hybrid
• Transport Package: Honeycomb
• Specification: 480*360*240
• Trademark: Bangzhao and OEM
• Origin: Zhejiang
• HS Code: 8504403090
• Production Capacity: 5000

Product Description

products description


PWM Model Product Characteristics
1.The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users' technical requirements.
2.The big screen LCD display. Clearly present the working status of the wind turbine, solar panel, battery and controller.(Wind turbine voltage, current, power display ;solar voltage, current, power display, battery charging current, voltage, charging power, power display.)
3.Two sets of control systems:PWM constant voltage system and three-phase dump load system.
4.PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM's capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system.
5.When the battery disconnect or damage, the three-phase dump load will start automatically to avoid the wind turbine idling and runaway accident.
6.When the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current.
7.The protection function of battery: polarity reverse protection, disconnection and damage protection.
8.Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery.
9.Auto recharging of battery: When the battery voltage reduces to 108% of the rated voltage,it stops three-phase dump load to recharge battery automatically.
10.For the different wind turbine type, the controller can be equipped with mechanical yawing, furled empennage, mechanical or hydraulic, pneumatic, electric magnetic and other brake functions.
11.The inside of the controller is equipped with surge arrester. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On the other way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.
12.The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will carry out three-phase dump load forcibly.
13.Optional communication Mode:RS232,RS485,GPRS,USB,RJ45 ect, Can monitor multiple devices running.


Off - Grid Wind Solar Controller 3000W

Type	3KW-24Vdc	3KW-48Vdc	3KW-96Vdc
Wind turbine rated power	3KW	3KW	3KW
Wind turbine max. power	6KW	6KW	6KW
Solar panel power	900W	900W	900W
Battery	24Vdc	48Vdc	96Vdc
Function	Rectifier,charge, control
Display mode	LCD
Display content	Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current
PWM constant pressure voltage	>29Vdc	>58Vdc	>116Vdc
3-phase load voltage of the wind turbine	30±1Vdc	60±1Vdc	120±2Vdc
Recovery charging voltage of the wind turbine	27±1Vdc	54±1Vdc	108±2Vdc
Solar controller stop charging voltage	30±1Vdc	60±1Vdc	120±2Vdc
Solar restore charge voltage	<29Vdc	<58Vdc	<116Vdc
Low-voltage of the battery	20±1Vdc	40±1Vdc	80±2Vdc
Self-provided connecting wire of the battery	>30mm²	>12mm²	>6mm²
PWM fuse	125A	63A	25A
Solar fuse	40A	25A	16A
Charging fuse	160A	100A	50A
Work environment temperature	-30-60°C
Relative humidity	<90% No condensation
Noise (1m)	<40dB
Degree of protection	IP20(Indoor)
Cooling method	Forced air cooling
*Communication interface (optional)	RS485/USB/GPRS/Ethernet
*Temperature compensation (optional)	-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C
Size of the controller (mm)	655*480*320	480*360*240	480*360*240
Weight of the controller	27Kg	23Kg	23Kg
Size of the dump load (mm)	410*370*130	410*370*130	410*370*130
Weight of the dump load	8Kg	8Kg	8Kg

*Above parameter only for reference
1. Could be custom made to user specifications. 
2, Could have solar power control subject to user demand.