50kw 100kw Wind Generator System on Grid Wind Turbine Controller

• Customization: Available
• After-sales Service: Yes
• Warranty: Yes
• Model NO.: BWS series
• Output Type: DC
• Number of Blade: Multiple-Blade
• Rotating Shaft: Horizontal
• Stress Way of Blade: Resistance
• Power: 10-100kW
• Phase: 3 Phase
• Certification: CE
• Transport Package: Wooden Box
• Specification: BWS-50KW
• Trademark: Bangzhao or Sandi or OEM
• Origin: China
• Production Capacity: 888sets/Year

Product Description

Product Description

The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users' technical requirements.

Two sets of control systems:PWM constant voltage system and three-phase dump load system.

PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM's capacity, the three-phase dump load will automatically start immediately. After 10-20 minutes, the three-phase dump load will stop and the wind turbine will re-start to resume power supply to ensure the safe running of the overall wind turbine generation system.

When the strong or super-strong wind conditions, the controller can conduct constant voltage output to ensure the inverter safety running.

When the condition of disconnected grid-connected inverter, the controller can conduct constant voltage output and wait for inverter resumption.

The three-phase dump load of the controller will automatically start and the inverter will stop grid output when the power grid is off. As soon as the grid power resuming, the controller stops three-phase dump load and the inverter will resume power supply.

For the different wind turbine generator type, the controller can be equipped with mechanical yawing, furled empennage, mechanical or hydraulic, pneumatic, electric magnetic and other brake functions.

The inside of the controller is equipped with surge arrester. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On another way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.

The below LED status indication can be found on the front panel: indications of wind turbine, dump load, three-phase dump load delay time, under pressure, grid power and DC output voltage.

Voltmeter indication: Indicate the controller DC output voltage.

The controller is equipped with emergency stop switch; in case of emergency, press down the emergency stop button in the front panel to cut off all power supply of the controller and the wind turbine will immediately carry out three-phase dump load.

The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will carry out three-phase dump load forcibly.

 

Product Parameters

Type BWGT-	50KW	100KW
Wind turbine rated power	50KW	100KW
Wind turbine Max. power	100KW	200KW
Function	Rectifier,charge, control
Display mode	LCD
Display content	Wind turbine voltage, wind turbine current, wind turbine power, DC output voltage,DC output current, DC output power
PWM constant voltage	≥650dc	≥650dc
wind turbine 3-phase dump load voltage1	670±5Vdc	670±5Vdc
three-phase dump load 1 delay time	12-20 min	12-20 min
wind turbine 3-phase dump load voltage2	680±5Vdc	680±5Vdc
three-phase dump load 2 delay time	12-20 min	12-20 min
wind turbine 3-phase dump load voltage3	700±5Vdc	700±5Vdc
three-phase dump load 3 delay time	12-20 min	12-20 min
PWM dump load fuse	63A	100A
Fuse of DC output	100A	200A
Self-provided connecting wire of the PWM dump load (mm²)	>10mm²	>20mm²
Self-provided connecting wire of the dump load 1(mm²)	>10mm²	>16mm²
Self-provided connecting wire of the dump load 2(mm²)	>10mm²	>16mm²
Self-provided connecting wire of the dump load 3(mm²)	>10mm²	>16mm²
Work environment temperature	-30-60°C
Relative humidity	<90% No condensation
Noise (1m)	<40dB
Degree of protection	IP20(Indoor)
Cooling method	Forced air cooling
Communication interface (optional)	RS485/USB/GPRS/Ethernet/CAN
*Temperatur compensation(optional)	-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°C
Size of the controller (mm)	690*590*1300 mm	690*590*1300 mm
Weight of the controller	120Kg	120Kg
Size of the dump load (mm)	760*520*1200(3pcs)	760*520*1200(4pcs)
Weight of the dump load	330Kg	440Kg

 

 *Above parameter only for reference

1. Could be custom made to user specifications.  2. Could have solar power control subject to user demand.

*Above parameter only for reference

1. Could be custom made to user specifications.  2, Could have solar power control subject to user demand.

Detailed Photos

 

Company Profile

 Bangzhao Electric Co.,Ltd is a company who was established in 2008 and specialized in developing and supplying of power products. The high performance of its products stems from the cutting-edge technology developed by the domestic top 100 engineers. During the past 10 years, we have been providing the best system solutions of pure sine wave inverter,solar pump inverter,explosion-proof inverter,DC combiner box,controller,AC to DC battery cabinet ,power phase converter etc. to customers, it is widely applied in the industry of solar energy,wind power,water power,car,ship,train,hospital, aviation,automation,etc.