PV Energy Storage Control Machine Inverter for Solar System

• Nature of Source Flow: Active Inverter
• Certification: CE
• Output Power: >1000W
• Grid Type: off-Grid Inverter
• Output Type: Single
• Circuit Topologies: Full-Bridge Type
• Model NO.: BZIC-10KW
• Nature of Wave String: Sine Wave Inverter
• Type: DC/AC Inverters
• Transport Package: Wooden Box and Honeycomb Box
• Specification: CE
• Trademark: Bangzhao and OEM
• Origin: Zhejiang
• HS Code: 8504403090
• Production Capacity: 5000

Product Description

Off-Grid Pure Sine Wave Inverter
Our BZP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:

1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
2. Intelligentized, modularized, simple structure design with powerful function.
3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
4. The output frequency can be setting via LCD panel, it's very convenient for customer.
5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
8. Low Frequency Transformer, which ensures that inverter has high efficiency.
9. High conversion efficiency, Max. Efficiency≥94%,if 48VDC input,the efficiency can more than 85%.
10.  Adopts black pure aluminum radiator, which confirms the best radiating performance.
11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
12. Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V.
13. Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
14. Optional function:RS485 remote monitoring,AC bypass input,built in solar charge controller or AC to DC battery charger.

    Model		BZP-8KW		BZP-10KW
    Isolation mode		Low Frequency Transformer
    DC Input	Rated voltage (Vdc)	120V	192V	192V		240V
    	Rated current(A)	67A	42A	52A		42A
    AC Output	Rated output power	8KW		10KW
    	Output waveform	Pure Sine Wave
    	Rated Voltage	220V±3%	380VAC±3%	220V±3%		380VAC±3%
    	Phases	Single phase	3 phase 4 wire	Single phase		3 phase 4 wire
    	Rated current(A)	36A	12A (phase current)	45.5A		15A (phase current)
    	Frequency	50Hz or 60Hz
    	Rated output voltage range (V)	110/120/220/230/240/380/400/415VAC optional
    	Power Factor(PF)	1
    	Overload Ability	150%, 5 seconds
    	Efficiency	>93%
    	Waveform distortion rate (THD)	<3%(Linear load)
    	Dynamic Response (0 to 100% load)	5%,≤50ms
    	Display	LCD
    	Running mode	Working continuously
    	Electrical insulation properties	2000Vac, 1 Minute
    Communication interface (optional)		RS485
    Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
    	Cooling method	Fan-cooled
    	Short-circuit protection	No automatic recovery, need to restart the machine
    Working environment	Noise ( 1 meter)	≤50dB
    	Degree of protection	IP20(indoor)
    	Working Altitude(m)	≤2000
    	Working temperature	-25~+50ºC
    	relative humidity	0~90%,non-condensing
    Mechanical dimension	Depth* Width * Height	540x540x760mm
    	Weight (Kg)	120Kg			130Kg

Product Feature:
1. Excellent EMC design
2. Industrial-grade chip
3. Full enclosed duct design and high speed fan for cooling
4. Users can parallel connect lots of our controllers in a system
5. Infineon IGBT module or IR MOSFET ensures stable performance
6. New SOC method indicates the power generation information of daily, monthly and total
7. 3''LCD+LED display+touching keys as HMI makes the operation more easy
8. PWM Charging technology: fast charging, equalize charging and float charging
9. Advanced battery activation technology increases battery lifetime 30% at least and improves the system performance
10. Temperature compensation function compensates the voltage based on different
temperature
11. RTC function indicates the real time and temperature
12. The second protection will protect battery from destroying when the power switch (IGBT) is down (optional function)
13. DC output function (Optional function)
14. Standard Modbus protocol for RS485 or GPRS communication.
Technical Parameter
Wall-mounted for 24V~600V / 30A~150A

Battery group system voltage	24V	48V	96V	192V	240V	360V	480V	540V	600V
PV Max. input open circuit voltage	100V	100V	200V	350V	450V	700V	950V	1000V	1000V
Rated charging current	30A      50A     60A    80A   100A    120A   150A
Number of PV input string	1 group (Optional 2 group)
Equalize charging voltage	28.8V	57.6V	115.2V	230.4V	288V	432V	576V	648V	720V
Equalize charging recovery voltage	26.4V	52.8V	105.6V	211.2V	264V	396V	528V	594V	660V
Equalize charging time	120 minutes
Float charging voltage	27.6V	55.2V	110.4V	220.8V	276V	414V	552V	621V	690V
Over voltage disconnect	32V	64V	128V	256V	320V	480V	640V	720V	800V
Over voltage reconnect	30V	60V	120V	240V	300V	450V	600V	675V	750V
No-load loss	<0.5W
Environment temperature	-25ºC ~ 55ºC
Terminal type	TC series barrier terminal
Elevation	≤4000M, it should reduce power if the elevation high than 4000M
Humidity	0 ~ 98%, Non-condensing
Protection level	IP32
Display	3'' LCD(White backlight)
Display language	English
Indicator light	Error indicator/Charging indicator
Noise	< 30dBA
Cooling method	Fan + heat sink
Dimension	420*345*157mm
Net Weight	10KG
Package size	540x470x280mm
Gross weight	12KG
Package information	Hard box with pearl sponge
Optional function	DC output, RS485, GPRS

Remark: "Equalize voltage", "Equalize recovery voltage", "Equalize charging time", "Float voltage", "High voltage disconnect", "High voltage reconnect" are default setting, users can adjust them according to different requirement.
Our company can adjust parameter configuration according to user's requirement.

Company Information
Packaging & Shpping
Why choose our product
Contact information