| Customization: | Available |
|---|---|
| Application: | High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer |
| Output Type: | Dual |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The BZT series power phase converter, the phase angle is 120 degrees, the harmonic distortion rate of less than 2%, fully meet the national electric power quality standards, applicable to various types of load (such as: welding machine, welding machine, electric hoist, roll gate, packing machine, chocolate coating machine, lathe, motor, elevator, inverter compressor, debugging three-phase load).
BZT series power phase converter to solve electric power in some areas because of the inconvenience to the production, but also solve some for the limitation of the site can not apply to the three-phase power demand or frequency conversion.
Technical Features:
1) Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
2) Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
3) Pure sine wave output with good transient response less than 50ms, waveform distortion is very little, higher conversion efficiency and stable output voltage.
4) Adopted low frequency transformer which ensure the input voltage and output voltage are completely electrical isolated to avoid interference.
5)Using the SVPWM space vector algorithm, high conversion efficiency, high instantaneous power and low no-load loss conversion efficiency can reach more than 94%, no-load loss is small.
6) Output AC Power is suitable for all types of electric appliances, electric tools, electric motors etc. higher capability of driving load.
7) Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices.
8) Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection.
9) High conversion efficiency, high instantaneous power and low load loss.
10) The input voltage, output voltage, frequency and phase can be custom made.
11) DC input optional.
| Model | BZT-10KW | |
| Isolation | Low Frequency Transformer | |
| AC Input | Input rated voltage(VAC) | Single phase 220V |
| Input rated current(A) | 45.4A | |
| Input voltage range | 110/120/220/230/240Vac optional | |
| AC Output | Rated AC output power | 10KW |
| AC output waveform | Pure sine wave | |
| Phases | Three phase, 4 wires | |
| Output rated voltage | 380VAC ±3% | |
| Output rated current(A) | 15.1A (per phase) | |
| Output voltage range | 380/400/415/440/480Vac optional | |
| Output Frequency | 50Hz/60Hz±0.05Hz | |
| Power Factor(PF) | 0.9 | |
| Overload Ability | 150%, 10s | |
| Efficiency | >93% | |
| Waveform distortion rate (THD) | <3%(Linear load) | |
| Crest Factor (CF) | 3:1 | |
| Display | LCD | |
| Electrical insulation properties | 2500Vac, 1 Minute | |
| Ambient temperature | -15~+55ºC | |
| Using environment humidity | 0~90%,No condensation | |
| Protection | Input under voltage, overvoltage, output over-current, short circuit, overheating etc. | |
| Structure | Cooling method | Fan-cooled |
| Noise | <40dB | |
| Degree of protection | IP20(indoor) | |
| Using altitude(m) | ≤3000 | |
| Dimensions (mm) | 540x540x760mm | |
| Weight (Kg) | 106Kg | |
| CE Standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | |
){kind=link}