1 Phase /3 Phase Hybrid Inverter 10kw 15kw 20kw Battery Inverter with 72kwh Lithium Ion Battery and 60A AC-DC Charger

• After-sales Service: Yes
• Warranty: Yes
• Nature of Source Flow: Active Inverter
• Phase: Three
• Output Power: >1000W
• Certification: SAA, CE, ROHS, ISO9001
• Brand: Bangzhao or OEM
• Type: DC/AC Inverters
• Power Source: Solar Power
• Circuit Topologies: Full-Bridge Type
• Nature of Wave String: Sine Wave Inverter
• Apply for: Solar Cells System
• Output Wave Form: Pure Sine Wave
• Two Start Mode: Reduction Voltage Start and Variable Frequency Sta
• RS232 or 485: Optional
• Display: LCD
• Frequency: Can Adjustable
• Power: 60kw
• Product Type: DC to AC
• Application: Home Theater
• Transport Package: Honeycomb Box with Pallet
• Specification: CE
• Trademark: BANGZHAO OR OEM
• Origin: China
• HS Code: 8504403090
• Production Capacity: 9999PCS

Product Description

1 phase /3 phase hybrid inverter 10kw 15kw 20kw battery inverter with 72kwh lithium ion battery and 60A AC-DC charger

Operating Mode:

Ø  When the photovoltaic is sufficient, charge the battery while supplying the load for use;

Ø  When the photovoltaic is insufficient, the load is supplied by the battery. When the battery is insufficient, the EMS system starts the generator to charge the battery and continues to supply power to the load. The load power supply must not be interrupted;

Ø  When the equipment fails, it can be switched to maintenance bypass work.

 

Zhejiang Bangzhao Electric Co., Ltd. Solar lithium battery energy storage hybrid system includes lithium iron phosphate battery module, BMS, solar controller, AC-DC charger,Pure sine wave inverter, central control unit CCU, temperature detector, integrated structure, etc.

The solar panels in this system are used for battery storage and power output;

The BMS module completes the detection and control of the voltage, current, temperature, SOC, SOH, and charging and discharging related parameters of the power battery pack;

 The BMS system monitors the photovoltaic or solar cells according to the battery condition. The mains charging is controlled to maximize the protection of battery charging and discharging performance.

The sine wave inverter realizes DC to AC conversion to achieve DC conversion. Each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Centralized communication displays all the data of the system in an LCD touch screen.

 

Model		BZPC-30KW		BZPC-40KW
Isolation mode		Low Frequency Transformer
DC Input	Rated voltage (Vdc)	240V	300V	360V
	Rated current(A)	125A	100A	111A
AC Bypass Input	Rated voltage (Vac)	220V	380V	380V
Rated Solar Charge Current(A)		30A/50A/60A/80A/100A/120A/150A Optional(Can be in parallel)
Rated AC Charge Current(A)		3A/5A/7A/10A/20A/40A Optional(Can be in parallel)
AC output	Output waveform	Pure Sine Wave
	Rated Voltage	220V±3%	380VAC±3%	220V±3%	380VAC±3%
	Phases	Single phase	3 phase 4 wire	Single phase	3 phase 4 wire
	Rated current(A)	136A	45.5A (phase current)	182A	61A (phase current)
	Frequency	50Hz or 60Hz
	Power Factor(PF)	1
	Overload Ability	150%, 5 seconds
	Efficiency	>93%
	Waveform distortion rate (THD)	<3%(Linear load)
	Dynamic Response (0 to 100% load)	5%,≤50ms
	Display	LCD
	Running mode	Working continuously
	Electrical insulation properties	2000Vac, 1 Minute
Communication interface (optional)		RS485
Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
	Cooling method	Fan-cooled
	Short-circuit protection	No automatic recovery, need to restart the machine
Working environment	Noise ( 1 meter)	≤80dB
	Degree of protection	IP20(indoor)
	Working Altitude(m)	≤2000
	Working temperature	-25~+50ºC
	relative humidity	0~90%,non-condensing
Optional		20kwh to 500kwh lithium battery pack and BMS