MPPT Solar Energy System 3 Phase 127/220V off Grid Pure Sine Wave Hybrid Inverter

• Nature of Source Flow: Active Inverter
• Certification: ISO9001, CE
• Output Power: >1000W
• Grid Type: off-Grid Inverter
• Output Type: Single
• Circuit Topologies: Full-Bridge Type
• Model NO.: BZPC-40KW
• Nature of Wave String: Sine Wave Inverter
• Type: DC/AC Inverters
• Transport Package: Wooden Box or Honeycomb Box
• Specification: CE
• Trademark: Bangzhao and OEM
• Origin: Zhejiang
• HS Code: 8504403090
• Production Capacity: 5000

Product Description

The new Autumn "inverter control integrated machine"  
Bangzhao Electric designed the inverter control integrated machine according to customer requirements, integrating the characteristics of off-grid inverter and solar charge controller.
Convenient customer wiring and save installation space.

Solar Hybrid Power Inverter technical:

1, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the nature of their load.

2, The output frequency can be set, this function is very convenient for customer.

3, The output voltage can be set between +20 % to -40 % of rated voltage. It's a great convenience to users.

4, The DC input voltage range can also be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries, photovoltaic modules also can be used flexibly.

5, Pure sine wave output. with good transient response less than 40MS, little harmonic distortion, higher conversion efficiency and stable output voltage.

6, Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.

7, Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.

8, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-400V or 480-850V(Optional).

9, Product have passed the European CE (EMC and LVD) certificated and accredited by Australia CEC energy network.

Solar Charge Controller technical:

1.Adopt PWM multistep sequential limiting current charge method, auto control multiple solar array connection or shut off orderly according to the battery group voltage change tendency.

2.Adopt multiple-circuit charging-control circuit and individual killer switch on each circuit.

3.With auto protection function of over charge, electronic short circuit, anti-reverse protection. Prevent the battery group reverse charging to the solar panel array at night.

4.Big intuitionistic LCD screen shows the working status of solar panels, battery and controller. ( the voltage, current, power of solar energy panel and battery)

5.Power switch driving circuit is completely isolated from sampling circuit. The control signals is transmitted by opto isolation, with super-high disturbence rejection and stability.

6.Power switch driving circuit is completely isolated from sampling circuit. The control signals is transmitted by opto isolation, with super-high disturbence rejection and stability.

7.There are lightning protection device inside the controller. Limit instantaneous overvoltage which entered into solar panels under a level which the system can withstand; or unload the strong lightning current to the ground. To protect the equipment from lightning surge.

8.Adopts the industrial-grade chips for all control, which can work under the cold, hot, humid conditions.

9.Temperature compensation function. Compensate the temperature according different battery type.

10.Fixable communication solution with RS-232,RS-485,USB,GPRS,Etherner,etc.

IP45 outdoor type:

Technical Parameters (Normal model)

Model		BZPC-40KW	BZPC-60KW
Isolation mode		Low Frequency Transformer
DC Input	Rated voltage (Vdc)	360V
	Rated current(A)	112A	167A
Charge Current(A)		30 to 150A(can be customizable)
AC Output	Rated output power	40KW	60KW
	Output waveform	Pure Sine Wave
	Rated Voltage	380VAC±3%	380VAC±3%
	Phases	3 phase 4 wire	3 phase 4 wire
	Rated current(A)	60.6A (phase current)	91A (phase current)
	Frequency	50Hz or 60Hz
	Rated output voltage range (V)	380/400/415/440VAC optional
	Power Factor(PF)	1
	Overload Ability	150%, 5 seconds
	Efficiency	>95%
	Waveform distortion rate (THD)	<3%(Linear load)
	Dynamic Response (0 to 100% load)	5%,≤50ms
	Display	LCD
	Running mode	Working continuously
	Electrical insulation properties	2000Vac, 1 Minute
Communication interface (optional)		RS485
Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
	Cooling method	Fan-cooled
	Short-circuit protection	No automatic recovery, need to restart the machine
Working environment	Noise ( 1 meter)	≤50dB
	Degree of protection	IP20(indoor)
	Working Altitude(m)	≤2000
	Working temperature	-25~+55ºC
	relative humidity	0~90%,non-condensing

Our company can adjust parameter configuration according to user's requirement.

Power inverter built in solar charge controller and AC-DC charger: