| Nature of Source Flow: | Active Inverter |
|---|---|
| Output Power: | >1000W |
| Grid Type: | off-Grid Inverter |
| Output Type: | Multiple |
| Circuit Topologies: | Full-Bridge Type |
| Nature of Wave String: | Sine Wave Inverter |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Technical Features:
² Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
² Intelligentized, modularized, simple structure design with powerful function.
² Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
² The output frequency can be setting via LCD panel, it's very convenient for customer.
² The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
² The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
² Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
² Low Frequency Transformer, which ensures that inverter has high efficiency.
² High conversion efficiency, Max. Efficiency≥97%
² Adopts black pure aluminum radiator, which confirms the best radiating performance.
² Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
² Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-400V or 300-800V.
² Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
² European CE (EMC, LVD) Certificate and accredited by Australian CEC, ERAC energy network.
| Model | BZEx-10KW | |
| Isolation mode | Low Frequency Transformer | |
| DC Input | Input rated voltage (Vdc) | Single phase 220V |
| Input rated voltage range | 110/120/220/230/240V/380V/415V/440V/480Vac optional | |
| Input rated current(A) | 45.5A | |
| AC Output | Rated output power | 10KW |
| Output waveform | Pure sine wave | |
| Phases | Three phase, 4 wire | |
| Output rated voltage | 380VAC ±3% | |
| Output voltage range | 220/380/400/415/440/480Vac optional | |
| Output rated current | 15A (phase current) | |
| Output Frequency | 50Hz/60Hz±0.05Hz | |
| Power Factor(PF) | 1 | |
| Overload Ability | 150%, 10s | |
| Efficiency | >94% | |
| Waveform distortion rate (THD) | <3%(Linear load) | |
| Dynamic Response (0 to 100% load) | 5%,≤50ms | |
| Display | LCD | |
| Running mode | Working continuously | |
| Electrical insulation properties | 2000Vac, 1 Minute | |
| Protection function | Protection | Input under voltage, over voltage, output over-current, short circuit, overheating etc. |
| Cooling method | Fan-cooled | |
| Short-circuit protection | No automatic recovery, need to restart the machine | |
| Working environment | Ambient temperature | -15~+55ºC |
| Using environment humidity | 0~90%,No condensation | |
| Noise ( 1 meter) | ≤50dB | |
| Degree of protection | IP20(indoor) | |
| Using altitude(m) | ≤2000 | |
| Dimension (mm) | 550x550x800mm | |
Voltage and frequency converter,
1,50HZ to 60HZ or 60HZ to 50HZ
2,Single phase 220VAC to 3 Phase220VAC
(L+N=120VAC to L1+L2+L3=220VAC,L1,L2,L3+N=127VAC)
3,2 phase 240VAC to 3 phase 220VAC
(L1+L2=240VAC,L1,L2 +N=120VAC to L1+L2+L3=220VAC,L1,L2,L3+N=127VAC )
4,3 Phase 220VAC to 3 phase 380VAC
(L1+L2+L3=220VAC,L1,L2,L3+N=127VAC to L1+L2+L3=380VAC,L1,L2,L3+N=220VAC)
5,3 Phase 380VAC to 3 phase 240VAC
(L1+L2+L3=380VAC,L1,L2,L3+N=220VAC to L1+L2+L3=240VAC,L1,L2,L3+N=138VAC)
Also can choose with DC input
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}