Product Description
PV inverter-controller is a device that integrates PV inverter, PV panel and intelligent controller, which plays a key role in PV power generation system. The main function of the device is to convert solar energy into electricity and output it to the grid.
Specifically, the PV panels are responsible for converting solar energy into DC power, the inverter is responsible for converting DC power into AC power, and the smart controller monitors and controls the entire system to ensure proper operation and optimal power generation efficiency. This all-in-one design not only reduces the transport cost, but also saves the installation space of the solar system.
In addition, the PV inverter-control all-in-one has a variety of advantages. It is small in size, has less wiring, is simple to use and easy to maintain. At the same time, due to the high efficiency of the whole machine, its cost performance is also quite excellent, especially suitable for household systems. The internal protection circuits are complete, including input overvoltage, input undervoltage, output overload, output short circuit, input DC reversal, overheating protection, etc., ensuring safety during use.
Detailed Photos
Inverter with solar controller machine:
IP45 outdoor type inverter with solar controller:
Model |
BZPC-80KW |
BZPC-100KW |
Isolation mode |
Low Frequency Transformer |
DC Input |
Rated voltage (Vdc) |
480V |
Rated current(A) |
167A |
208A |
Rated Charge Current(A) |
30A/50A/60A/80A/100A/120A/150A Optional |
Three-stage charging method |
Quick Charge,Equalize Charge,Float Charge |
AC output |
Output waveform |
Pure Sine Wave |
Rated Voltage |
380VAC±3% |
380VAC±3% |
Phases |
3 phase 4 wire |
3 phase 4 wire |
Rated current(A) |
121A (phase current) |
152A (phase current) |
Frequency |
50Hz or 60Hz |
Rated output voltage range (V) |
380/400/415/440VAC optional |
Power Factor(PF) |
1 |
Overload Ability |
150%, 5 seconds |
Efficiency |
>93% |
Waveform distortion rate (THD) |
<3%(Linear load) |
Dynamic Response (0 to 100% load) |
5%,≤50ms |
Display |
LCD |
Running mode |
Working continuously |
Electrical insulation properties |
2000Vac, 1 Minute |
Communication interface (optional) |
RS485 |
Protection Function |
Protection |
Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. |
Cooling method |
Fan-cooled |
Short-circuit protection |
No automatic recovery, need to restart the machine |
Working environment |
Noise ( 1 meter) |
≤100dB |
Degree of protection |
IP20(indoor) |
Working Altitude(m) |
≤2000 |
Working temperature |
-25~+50ºC |
relative humidity |
0~90%,non-condensing |
Optional Function |
AC bypass input,built in AC-DC charger,start AC generator |
Certifications
Company Profile
Bangzhao Electric Co.,Ltd is a company who was established in 2008 and specialized in developing and supplying of power products. The high performance of its products stems from the cutting-edge technology developed by the domestic top 100 engineers. During the past 10 years, we have been providing the best system solutions of pure sine wave inverter,solar pump inverter,explosion-proof inverter,DC combiner box,controller,AC to DC battery cabinet ,power phase converter,lithium battery storage system etc. to customers, it is widely applied in the industry of solar energy,wind power,water power,car,ship,train,hospital, aviation, automation,etc.