Type: | Micro-Computer Control Automatic Diesel Generator |
---|---|
Installation Method: | Fixed |
Stroke: | Bangzhao or OEM |
Cooling Method: | Fan Cooling |
Output Type: | AC Three Phase |
Speed: | Speed |
Customization: |
---|
Suppliers with verified business licenses
1. Standardized components, modular architecture, easy for expansion
2. High energy density, small footprint, short construction period, strong environmental adaptability
3. Battery module within the layered stack design, with more than 10 years of long design life
4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH-500KWH optional
5. The use of international advanced Mitsubishi IPM module and intelligent power module, with high power fast adjustment capability
6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management
7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system
8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform
9. PV charge controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of PV modules and batteries
10. Colorful LCD display all module working information and status
Energy Storage Lithium Battery 10 years service life LiFePO4 lithium battery with BMS system for solar energy storage
Introduction
All-in-one ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, off-grid inverter, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; photovoltaic controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system.
Details for China Supplier Three Phase Nickel Iron Batteries System (BZP-60KW) Power Inverters -lithium Battery storage InverterModel | BZP-50KW | BZP-80KW | ||
Isolation mode | Low Frequency Transformer | |||
DC Input | Rated voltage (Vdc) | 360V | ||
Rated current(A) | 139A | 222A | ||
AC Output | Rated output power | 50KW | 80KW | |
Output waveform | Pure Sine Wave | |||
Rated Voltage | 380VAC±3% | 380VAC±3% | ||
Phases | 3 phase 4 wire | 3 phase 4 wire | ||
Rated current(A) | 76A (phase current) | 121A (phase current) | ||
Frequency | 50Hz or 60Hz | |||
Rated output voltage range (V) | 380/400/415/440VAC optional | |||
Power Factor(PF) | 1 | |||
Overload Ability | 150%, 5 seconds | |||
Efficiency | >93% | |||
Waveform distortion rate (THD) | <3%(Linear load) | |||
Dynamic Response (0 to 100% load) | 5%,≤50ms | |||
Display | LCD | |||
Running mode | Working continuously | |||
Electrical insulation properties | 2000Vac, 1 Minute | |||
Communication interface (optional) | RS485 | |||
Protection Function | Protection | Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. | ||
Cooling method | Fan-cooled | |||
Short-circuit protection | No automatic recovery, need to restart the machine | |||
Working environment | Noise ( 1 meter) | ≤50dB | ||
Degree of protection | IP20(indoor) | |||
Working Altitude(m) | ≤2000 | |||
Working temperature | -25~+55ºC | |||
relative humidity | 0~90%,non-condensing | |||
Mechanical dimension | Depth* Width * Height | 800x850x1200mm | ||
Weight (Kg) | 420Kg | 550Kg |
Suppliers with verified business licenses