Solar Power System 192V DC to 380V AC 8kw Pure Sine Wave Power Inverter for Commercialize

• Customization: Available
• Nature of Source Flow: Active Inverter
• Certification: ISO9001, CE
• Model NO.: BZP-8KW
• Output Power: >1000W
• Grid Type: off-Grid Inverter
• Output Type: Single
• Circuit Topologies: Full-Bridge Type
• Nature of Wave String: Sine Wave Inverter
• Type: DC/AC Inverters
• Transport Package: Wooden Box
• Specification: 540*540*760
• Trademark: Bangzhao and OEM
• Origin: Zhejiang
• HS Code: 8504403090
• Production Capacity: 99999

Product Description

PV Off-grid Solar Power System
PV Off-grid solar power generation system including solar panel array, solar charge controller, storage battery, Off-grid inverter, etc. In the sunshine, the solar panel convert the solar energy to DC power and charge the battery group by the charge controller. Then the off grid inverter convert the DC power into AC power for power supply the AC load.


Technical Features:

1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
2. Intelligentized, modularized, simple structure design with powerful function.
3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
4. The output frequency can be setting via LCD panel, it's very convenient for customer.
5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
8. Low Frequency Transformer, which ensures that inverter has high efficiency.
9. High conversion efficiency, Max. Efficiency≥94%,if 48VDC input,the efficiency can more than 85%.
10.  Adopts black pure aluminum radiator, which confirms the best radiating performance.
11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
12. Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V.
13. Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
14. Optional function:RS485 remote monitoring,AC bypass input,built in solar charge controller or AC to DC battery charger.Technical Parameters (Normal model)

    Model		BZP-8KW		BZP-10KW
    Isolation mode		Low Frequency Transformer
    DC Input	Rated voltage (Vdc)	120V	192V	192V		240V
    	Rated current(A)	67A	42A	52A		42A
    AC Output	Rated output power	8KW		10KW
    	Output waveform	Pure Sine Wave
    	Rated Voltage	220V±3%	380VAC±3%	220V±3%		380VAC±3%
    	Phases	Single phase	3 phase 4 wire	Single phase		3 phase 4 wire
    	Rated current(A)	36A	12A (phase current)	45.5A		15A (phase current)
    	Frequency	50Hz or 60Hz
    	Rated output voltage range (V)	110/120/220/230/240/380/400/415VAC optional
    	Power Factor(PF)	1
    	Overload Ability	150%, 5 seconds
    	Efficiency	>93%
    	Waveform distortion rate (THD)	<3%(Linear load)
    	Dynamic Response (0 to 100% load)	5%,≤50ms
    	Display	LCD
    	Running mode	Working continuously
    	Electrical insulation properties	2000Vac, 1 Minute
    Communication interface (optional)		RS485
    Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
    	Cooling method	Fan-cooled
    	Short-circuit protection	No automatic recovery, need to restart the machine
    Working environment	Noise ( 1 meter)	≤50dB
    	Degree of protection	IP20(indoor)
    	Working Altitude(m)	≤2000
    	Working temperature	-25~+50ºC
    	relative humidity	0~90%,non-condensing
    Mechanical dimension	Depth* Width * Height	540x540x760mm
    	Weight (Kg)	120Kg			130Kg

Rack type for Mobile Car power system: