MPPT Solar Power System 40kw off Grid Pure Sine Wave Pumping Inverter

• Nature of Source Flow: Active Inverter
• Certification: ISO9001, CE
• Output Power: >1000W
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BZP-40KW
• Grid Type: off-Grid Inverter
• Output Type: Triple
• Circuit Topologies: Full-Bridge Type
• Nature of Wave String: Sine Wave Inverter
• Type: DC/AC Inverters
• Efficiency: >94%
• Quanlity: High Quality
• Degree of Protection: IP20
• Display: LCD+LED
• Output Waveform: Pure Sine Wave
• Isolation Mode: Low Frequency Transformer
• Transport Package: Wooden Box and Honeycomb Box
• Specification: 650x750x1100mm
• Trademark: Bangzhao and OEM
• Origin: Zhejiang
• HS Code: 8504403090
• Production Capacity: 99999

Product Description

Product Description:
Solar water pumping system is constructed with solar panel array, solar pump inverter and AC water pump, DC current produced from solar panel will be delivered to solar pump inverter, and it will convert it into AC current to drive water pump, and will automatically regulate output frequency according to sun radiance intensity, maximum realize MPPT tracking function.
Technical Features:

1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
2. Intelligentized, modularized, simple structure design with powerful function.
3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
4. The output frequency can be setting via LCD panel, it's very convenient for customer.
5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
8. Low Frequency Transformer, which ensures that inverter has high efficiency.
9. High conversion efficiency, Max. Efficiency≥94%,if 48VDC input,the efficiency can more than 85%.
10.  Adopts black pure aluminum radiator, which confirms the best radiating performance.
11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
12. Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V.
13. Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
14. Optional function:RS485 remote monitoring,AC bypass input,built in solar charge controller or AC to DC battery charger.

Technical Data

Model		BZP-30KW		BZP-40KW
Isolation mode		Low Frequency Transformer
DC Input	Rated voltage (Vdc)	240V	300V	360V
	Rated current(A)	125A	100A	111A
AC Output	Rated output power	30KW		40KW
	Output waveform	Pure Sine Wave
	Rated Voltage	220V±3%	380VAC±3%	220V±3%		380VAC±3%
	Phases	Single phase	3 phase 4 wire	Single phase		3 phase 4 wire
	Rated current(A)	136A	45.5A (phase current)	182A		61A (phase current)
	Frequency	50Hz or 60Hz
	Rated output voltage range (V)	220/230/240/380/400/415VAC optional
	Power Factor(PF)	1
	Overload Ability	150%, 5 seconds
	Efficiency	>93%
	Waveform distortion rate (THD)	<3%(Linear load)
	Dynamic Response (0 to 100% load)	5%,≤50ms
	Display	LCD
	Running mode	Working continuously
	Electrical insulation properties	2000Vac, 1 Minute
Communication interface (optional)		RS485
Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
	Cooling method	Fan-cooled
	Short-circuit protection	No automatic recovery, need to restart the machine
Working environment	Noise ( 1 meter)	≤80dB
	Degree of protection	IP20(indoor)
	Working Altitude(m)	≤2000
	Working temperature	-25~+50ºC
	relative humidity	0~90%,non-condensing
Mechanical dimension	Depth* Width * Height	650x750x1100mm
	Weight (Kg)	260Kg			350Kg

Can be Customized according to customer requirements.
Company information

Our Service
Packaging & Shipping
Why Choose Our Product
Contact information