30A/50A/100A/150A DC-DC Rack-Mounted Type Solar Charge Controller with PWM Control Solar Power Battery Controller

• After-sales Service: Yes
• Warranty: 1-3 Years
• Condition: New
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: BZC series
• Certification: ISO, CE
• Application: Solar System Controller, Charger Controller, Solar Working Station, Voltage Controller
• Rated Voltage: 96VDC to 600VDC Range
• Transport Package: Honeycomb Box
• Specification: BZC series
• Trademark: Bangzhao or Sandi or OEM
• Origin: China
• Production Capacity: 8888sets/Year
• Package Size: 49.00cm * 23.00cm * 40.00cm
• Package Gross Weight: 15.000kg

Product Description

Product Description

 

1  Adopt PWM multistep sequential limiting current charge method, auto control multiple solar array connection or shut off orderly according to the battery group voltage change tendency.

2  Adopt multiple-circuit charging-control circuit and individual killer switch on each circuit.

3  With auto protection function of over charge, electronic short circuit, anti-reverse protection. Prevent the battery group reverse charging to the solar panel array at night.

4  Big intuitionistic LCD screen shows the working status of solar panels, battery and controller. (the voltage, current, power of solar energy panel and battery)

5  Power switch driving circuit is completely isolated from sampling circuit. The control signals is transmitted by opto isolation, with super-high disturbence rejection and stability.

6  There are lightning protection device inside the controller. Limit instantaneous overvoltage which entered into solar panels under a level which the system can withstand; or unload the strong lightning current to the ground. To protect the equipment from lightning surge.

7  Adopts the industrial-grade chips for all control, which can work under the cold, hot, humid conditions.

8  Temperature compensation function. Compensate the temperature according different battery type.

9  Fixable communication solution with RS-232, RS-485,USB,GPRS,Etherner,etc.
 

Product Parameters

 

Model	BZC96V-30A		BZC96V-50A			BZC96V-100A			BZC96V-200A
Battery group rated voltage	96Vdc		96Vdc			96Vdc			96Vdc
Max. PV open circuit voltage	176V		176V			176V			176V
PV Rated current	30A		50A			100A			200A
Maximum power of solar panels	2880Wp		4800Wp			9600Wp			19200Wp
Input PV module array number	1		1			1/2			1/2
Function	Auto stop charge, auto recharge voltage; Protection: connecting contrary, over current, short circuit, over heat etc.
Display mode	LCD
Display content	solar panel voltage, solar panel current, solar panel power, battery voltage, charge current
Floating Charge Voltage (adjustable)	110Vdc	110Vdc			110Vdc			110Vdc
Stop charge voltage	116Vdc	116Vdc			116Vdc			116Vdc
Recharge voltage	108V	108V			108V			108V
Voltage drop between PV and battery	1.5V
Max itself power consumption	100mA-150mA
Work environment temperature	-30-60°C
Relative humidity	<90% No condensation
Applicable altitude	The rated power should be reduced when it is higher than 2000m
Noise (1m)	<40dB
Degree of protection	IP20(Indoor)
Cooling method	Forced air cooling
Communication interface (optional)	RS485/USB/GPRS/Ethernet
Temperature compensation(optional)	-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°C
Product size (mm)	520*430*200mm			760*600*180mm			585*585*980mm
Weight	10Kg			26Kg			55Kg

Detailed Photos

Installation Case

Solar inverter built in Rack type solar charge controller for solar system: